Reset the Epson L130 L220 L310 L360 L365 Manually


One of the easiest steps to reset Epson L130 / L220 / L310 / L360 / L365 is to do a manual reset without any software. How to do it? following the steps.
1. Unplug the power cord for about 3-5 minutes.
2. Turn it back on and wait for the printer to turn on perfectly.
3. Next, press and hold the resume button (ink logo) for 5 seconds, then release.
4. Press and hold the resume button again for 3 seconds, then release.
5. Immediately after that, the printer will automatically reset and wait for it to finish.
6. If successful, the indicator light will not blink again and is ready to use.

However, if the manual reset above does not work, try doing an automatic reset using the L130 / L220 / L310 / L360 / L360 / L360 Program Resetter software.


loading...


Automatic Reset of the Epson L130 L220 L310 L360 L365

1. Download file : Resetter Epson Adjustment Program L130/L220/L310/L360/L365 , then extract the file.

2. Connect the printer cable to the computer.

3. Run the resetter application by clicking 2X on the icon "Adjprog-L130-L220-L310-L360-L365.exe".

4. Click the "Select" button, select the printer type under "Model Name" and the USB Port used, but it is recommended to select "Automatic Selection". After that click "OK".


loading...
5. Next, click "Specific Adjustment Mode" then select "Ink storage counter" then "OK".

6. On the next menu, check "Main pad counters", then click "Check". At this stage, the printer will provide some important information about the printer, including how many times it has been printed.


7. After that, check again on "Main pad counters" and continue by clicking "Initialization". Wait until the process is complete.

8. After the reset process is complete, the "Please turn on and turn off your printer" notification screen will appear. Now at this stage, please turn off and then turn on your printer again.

9. finish

Normally, the compilation printer is set up correctly, so that there will be no more flashing on the light indicator and in this installation you can use it at once.